STC15F2K60S2 LQFP44

STC15F2K60S2 series MCU is a single-chip microcontroller based on a high performance 1T architecture 8051 CPU, which is produced by STC MCU Limited. It is a new generation of 8051 MCU of high speed, high stability, low power consumption and super strong anti-disturbance. Besides, STC15F2K60S2 series MCU is a MCU of super advanced encryption, because it adopts the eighth generation of STC encryption technology. With the enhanced kernel, STC15F2K60S2 series MCU is faster than a traditional 8051 in executing instructions (about 8~12 times the rate of a traditional 8051 MCU), and has a fully compatible instruction set with traditional 8051 series microcontroller. External expensive crystal can be removed by being integrated internal high-precise R/C clock(±0.3%) with ±1% temperature drift (-40℃~+85℃) while ±0.6% in normal temperature (-20℃~+65℃) and wide frequency adjustable between 5MHz and 35MHz. External reset circuit also can be removed by being integrated internal highly reliable one with 8 levels optional threshold voltage of reset. The STC15F2K60S2 series MCU retains all features of the traditional 8051. In addition, it has 3-channels CCP/PCA/PWM, 8-channels and 10-bits A/D Converter(300 thousand times per sec.), large capacity of 2K bytes SRAM, two high-speed asynchronous serial ports and a high-speed synchronous serial peripheral interface. STC15F2K60S2 series MCU is usually used in communications which need for several UARTs or electrical control or some occasion with strong disturbance.

STC15 series MCU with super high-speed CPU core of STC-Y5 works 20% faster than STC early 1T series (such as STC12/STC11/STC10 series) at same clock frequency.

Enhanced 8051 Central Processing Unit, 1T, single clock per machine cycle, faster 8~12 times than the rate of a traditional 8051.

Operating voltage range: STC15F2K60S2 series: 5.5V ~ 4.2V (5V MCU). STC15L2K60S2 series: 3.6V ~ 2.4V (3V MCU).

On-chip 8/16/24/32/40/48/56/60/61/63.5K FLASH program memory with flexible ISP/IAP capability, can be repeatedly erased more than 100 thousand times.

Large capacity of on-chip 2048 bytes SRAM: 256 byte scratch-pad RAM and 1792 bytes of auxiliary RAM

Be capable of addressing up to 64K byte of external RAM

On-chip EEPROM with large capacity can be repeatedly erased more than 100 thousand times.

Dual Data Pointer (DPTR) to speed up data movement

ISP/IAP, In-System-Programming and In-Application-Programming , no need for programmer and emulator.

8 channels and 10 bits Analog-to-Digital Converter (ADC), the speed up to 300 thousand times per second, 3 channels PWM also can be used as 3 channels D/A Converter(DAC).

3 channels Capture/Compare units(CCP/PCA/PWM)

The high-speed pulse function of CCP/PCA can be utilized to to realize 3 channels 9 ~ 16 bit PWM (each channel of which takes less than 0.6% system time)

The clock output function of T0, T1 or T2 can be utilized to realize 8 ~ 16 bit PWM with a high degree of accuracy (which takes less than 0.4% system time)

Internal highly reliable Reset with 8 levels optional threshold voltage of reset, external reset circuit can be completely removed

Internal high- precise R/C clock(±0.3%) with ±0.6% (-20℃ ~+65℃) in normal temperature and frequency adjustable between 5MHz and 35MHz

Two high-speed asynchronous serial ports

A high-speed synchronous serial peripheral interface

Support the function of Encryption Download (to protect your code from being intercepted).

Support the function of RS485 Control

Code protection for flash memory access

Power management mode: Slow-Down mode, Idle mode(all interrupt can wake up Idle mode), Stop/PowerDown mode.

Timers which can wake up stop/power-down mode: have internal low-power special wake-up Timer.

six Timers/Counters, three 16-bit reloadable Timer/Counter(T0/T1/T2, T0 and T1 are compatible with Timer0/Timer1 of traditional 8051), T0/T1/T2 all can independently achieve external programmable clock output (3 channels), 3 channels CCP/PWM/PCA also can be used as three timers.

Programmable clock output function

One 15 bits Watch-Dog-Timer with 8-bit pre-scaler (one-time-enabled)

advanced instruction set, which is fully compatible with traditional 8051 MCU, have hardware multiplication / division command.

Package: LQFP44 (12mm x 12mm), LQFP-32 (9mm x 9mm), TSSOP20(6.5mm x 6.5mm), SOP28, SKDIP28, PDIP-40.